🎄 Merry Christmas and Happy Holidays! 🎁

Nanuk 935 6UP 6 Pistol Case

COLORS
BLACK
ORANGE
YELLOW
SILVER
OLIVE
GRAPHITE

The 6 Up Pistol case provides secure storage for up to 6 handguns and 10 single or double stack magazines. Perfect for law enforcement, military and gun enthusiasts, this case features resistant closed cell PEF foam construction for long term performance. The case will also accept 1911 style guns and accommodate guns fitted with trigger locks. With 2 reinforced eyelets for locking, you can store, secure and transport your expensive handguns with confidence. Polyurethane wheels and a one touch pull handle make transportation easy and convenient. The center foam insert can be removed to reconfigure the case for 4 handguns with a storage area for accessories.

Specs:

Interior dimensions (L x W x H) 20.5″ x 11.3″ x 7.5″
521 mm x 287 mm x 191 mm
Exterior dimensions (L x W x H) 22.0″ x 14.0″ x 9.0″
559 mm x 356 mm x 229 mm
Weight 11.6 lb | 5.2 kg
Lid depth 2.1″ | 53 mm
Base depth 5.4″ | 137 mm
Material Lightweight NK-7 resin
Internal volume 1.00 cu.ft (28.3 L)
Max buoyancy 58 lb | 26.4 kg
Temperature range Min -20°F (-29°C ) | Max 140°F (60°C)
Padlock Holes Diameter 0.340"
Water resistant (IP67) Yes
Warranty Conditional lifetime guarantee
Airline check-in Yes
Airline cabin carry-on Yes

 

Pistol Compatibility Chart

Compatible with most guns with a barrel up to 5".

 

​Limited Lifetime​ ​Warranty and ​Disclaimer

Plasticase, Inc. ("Plasticase") warrants that the NANUK case accompanying this document (the "Case") will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the "Warranty").


 

1. Returns

The customer must contact Plasticase in the event he or she believes the Case is defective and covered by this Warranty in order to open a warranty claim. Call Plasticase at 1-800-783-6883 between 9:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday to speak with a customer service representative. In some instances, it may be determined that parts can be easily installed by the customer and Plasticase reserves the right to ship replacement parts directly to the customer for installation. Otherwise, the customer must pay for shipping the Case to Plasticase at 1059 Boulevard des Entreprises Ouest, Terrebonne, QC J6Y 1V2, Canada for inspection. If the Case is defective, as determined solely by Plasticase after an inspection, the shipping costs will be refunded if proof of shipping is provided. No refunds of shipping costs will be made if the Case is not defective.

 

WARRANTY CLAIM FORM


 

2. Repair

or Replacement Plasticase's obligation under this Warranty is limited, at its sole and exclusive option, to either the repair or replacement of the Case where a defect has been claimed and is determined by Plasticase to be present. Upon inspection by Plasticase, the Case or parts thereof that prove to be defective will be repaired or replaced at no charge, and the Case will be shipped back to the customer by Plasticase.

 


 

3. Limitation

of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

 


 

4. Liability

Plasticase's cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.

Sign up and be informed